Get ready
1. A blade. An ordinary utility knife is sufficient, and you don't need a handle. You may also need to use a razor blade for special occasions.
2. Be careful. It's easy to do this kind of work, but most importantly, you have to be careful to be successful.
3. A hair dryer. This is the most important tool, and it is also the core tool in the whole set of methods, but it should be noted that the hair dryer we use is used for heating, so it must be able to blow relatively hot wind, ordinary hair dryers may not work, the older the better.
How to remove different materials
1. Self-adhesive tape on smooth paper boxes.
Scrape the beginning with a blade and tear it off slowly by hand. If the speed is too slow, you can use a hair dryer to heat it slightly.
2. Self-adhesive tape on the natural color paste paper packaging box.
Use a computer to blow and heat, you can open to a weak wind gear, scrape the beginning with a blade, focus on heating the back of the tape, be careful not to heat it too much, it will blow the tape out of shape. Tear it off slowly by hand, and you must be careful throughout the process. The kind of tape with a pattern will leave a little trace more or less, be careful not to heat it too much, otherwise, it will leave more. A little trick: the faster you uncover, the less residue you have, but the easier it is to tear the carton. The specific effect may be related to many aspects, but as long as you are proficient, in most cases, it can still be satisfactory, and it is not easy to find it if you don't look carefully when you seal it again.
3. Vulnerable labels such as computer accessories or mobile phones.
It can be scraped off slowly with a razor blade, but in some cases a thinner blade may be required, in which case a razor blade can be used. If the label is large, it can be heated with a hair dryer.
4. After unmasking, there will be a variety of anti-counterfeiting labels left by some characters composed of gum.
You can use the blade to gently pick the corners and heat it with a hair dryer to slowly lift the whole label. When dealing with this kind of label, you must be careful and careful, if you are not careful, you will leave residual traces, and it will not be successful.
5. Self-adhesive tape or sticker glued to a very thin plastic film.
General heating is definitely not possible, because the plastic film will also be blown out of shape. The method is very simple: tear directly by hand, not slowly, must be fast, such as the label is larger, it can be divided into several times, suddenly, quickly tear off by hand. To deal with this situation, the lower the ambient temperature, the better.